FBA006 EPOXY ADHESIVE 8 MINS

FBA006 EPOXY ADHESIVE 8 MINS

Quick Details

• Place of Origin: Hunan, China (Mainland)
• Classification: Double Components Adhesives
• Main Raw Material: Epoxy
• Usage: Construction, Fiber & Garment, Footwear & Leather, Packing, Transportation ,Woodworking, Hardware Industry
• Brand Name: FB,OEM Accepted
• ITEM NO: FBA006
• Component rate: A:B=1:1
• Appearance: transparent
• Solidifying speed: 5-10minutes
• Shear Strength: more than 5Mpa
• Period of validity: 12 months
• Customer's tailor: can accept customer's brand and design

Packaging & Delivery

Specifications

1.Repairs, seals, bonds all materials ,don't shrink
2.Resists oil, gas, water, most chemicals
3.non-sniffable,non-flammable

Detailed Product Description

It has tremendous strength and good durablity. It can be applied as thick as needed in one application. No need to buildup in thin layers since it dries by chemical reaction to the resin and hardener, rather than by air evaporation. Can be sanded, filled  when dry. No heat or pressure needed. Can bond all metals, wood, glass, concrete and rigid plastics.

Feature

(1)8 minutes rapid clear Epoxy is based on the room temperature, having the feature of  rapid curing within5-8mins; (2)suitable for small parts and structural strength.(3)can be used after 3 hour,(4)high adhesive performance, (5)can be lacquered and waxed,(6)not suitable for the joint of shaking place.(7)joint layer is fragile.

Scope of Application

The products of this series are widely used for bonding all kinds of hard materials, like iron, casting iron, steel, aluminum, glass, pottery, graphite, concrete etc. And it could be applied to bond and repair in the field of daily households ,home appliance, machine implement for agriculture, machine facilities,  stationary tools, arts, furniture, tube of water, valves, chemical piping, water towers, dam, etc.

 Using Method:
1.The surface should be clean and dry, without oil or wax
2.Take down the cap, pierce the seal, squeeze out evenly (A:B=1:1). Coat the surface with glue based on the mixing of the two components evenly,
3.Press it according to the actual condition. It could achieve the using intensity after the solidifying for three hours during the normal temperature, it is suggested to operate at above 10^oC.

Warning:
1.It must be even for the mixing of the two components during the adjusting of the glue. Quantity should not excess too much.
2. Tighten the caps after usage .Do not mix the cap of part A and B.
3.Wash the additional glue on the hands or the surfaces of bonding materials by alcohol before its solidifying.
4. Avoid touching with the eyes and skin directly. If getting touch with the skin, please wash them at once by using of a cloth with dipping of alcohol before solidifying, then, clean them by soap and warm water. If getting touch with the eyes, please flush them immediately with plenty of water, and see the doctor for serious situation.
5. Take strict precautions against touching by the kids and entering into the mouth.

 Storage and Packing:

1. Store on shady and cool place. The shelf life is one year. It can be reused based on passing of the test if being beyond the shelf life.

2. Preserve and transport as non dangerous products.

Specification:

28g/set, 12set/inner, 12inner/ctn

Means:41.6 x 29 x 48.7cm