FBAN552-1 ANAEROBIC GLUE 30MINS

 FBAN552-1 ANAEROBIC GLUE 30MINS

Quick Details

• Place of Origin: Hunan, China (Mainland)
• Classification: Other Adhesives
• Main Raw Material: anaerobic
• Usage: Construction, chemical area, industry, civilian use
• Brand Name: FB
• ITEM NO: FBAN552-1
• Color: light yellow
• Viscosity(CPS): 7000-13000
• Initial curing time: 30minutes
• Totally curing time: 24hours
• Temperature resistance: -60 to +220
• Guarantee period: 24months

Packaging & Delivery

Specifications

It is applied on the seal and lock for kinds of screw thread in pipes, it solved the problem of low utilization rate and serious osmosis when using traditional sealing material

Applicable scope

It was applied on the seal and lock for kinds of pipe, it solved the problem of low utilization rate and serious osmosis when use the traditional sealing material, and used for sealing and locking of the pipe and screw thread in chemical area, industry, civilian area, air-condition , water supply , military industry, gas pipe etc.

How to use

1,Clean  the oil on the surface by cotton cloth before installation.

2,If install for copper, steel, iron pipe material above 25degree,do the pressure test after2-4 hours, if temperature between 25degree to 15degree,do the pressure test after 4-8hours,if temperature between 15degree to 0degree,do the pressure test after 8-16hours.If applied for the stainless steel, aluminum, alloy steel, the time to do the pressure test should be double long.

3, Good performance on sealing, do not need over tight when install. When lock the pipe within DN32, can be sealed totally just screw down by hand.

4, Coat the glue outside when applied on pipe for drinking water.