Tel:+86 731 85459925
Fax: +86 731 85459925
Email: marvinfcm@firmbondglue.com
Skype: firmbondglue
Whatsapp & Wechat: +86 15388035433
FBAN552-2 ANAEROBIC GLUE 30MINS
Quick Details
Packaging & Delivery
Packaging Details: |
Specifications: 50 g/ tube 10 tubes/small box 120 tubes/big box |
Delivery Detail: |
35days after deposit |
Specifications
It is applied on the seal and lock for kinds of screw thread in pipes, it solved the problem of low utilization rate and serious osmosis when using traditional sealing material
Applicable scope
It was applied on the seal and lock for kinds of pipe, it solved the problem of low utilization rate and serious osmosis when use the traditional sealing material, and used for sealing and locking of the pipe and screw thread in chemical area, industry, civilian area, air-condition , water supply , military industry, gas pipe etc.
How to use
1,Clean the oil on the surface by cotton cloth before installation.
2,If install for copper, steel, iron pipe material above 25degree,do the pressure test after2-4 hours, if temperature between 25degree to 15degree,do the pressure test after 4-8hours,if temperature between 15degree to 0degree,do the pressure test after 8-16hours.If applied for the stainless steel, aluminum, alloy steel, the time to do the pressure test should be double long.
3, Good performance on sealing, do not need over tight when install. When lock the pipe within DN32, can be sealed totally just screw down by hand.
4, Coat the glue outside when applied on pipe for drinking water.